C&N PETROLEUM EQUIPMENT

VOH200 Series

400mm (16") MANHOLE COVER

Cast aluminium construction, this manhole cover features two equipment mounting positions for Over Fill and Vapour Recovery.

Any mounting position not used can be securely blanked off until required.
Ideal for either Top or Bottom loading.

For More Information Contact Us

VOH410 Series

455mm (18") diameter MANHOLE COVER

Cast Aluminium construction with four equipment mounting positions the VOH410 series is the premier manhole cover in the Liquip range.

This manhole cover is 455mm (18") in diameter andis ideal for either top or bottom loading.

For More Information Contact Us

VOH500 Series

500mm (20") MANHOLE COVER

Cast Aluminium construction.

It features three mounting positions for vapour recovery, overfill protection, dipstick or Diptronic accessories.

Any mounting position not utilized can be securely blanked off until required.

For More Information Contact Us

VOH750 Series

455mm (18") MANHOLE COVER

Cast Aluminium construction.

Features three equipment mounting positions for Overfill Probe, Vapour Recovery, Dip Tube or Diptronic applications.

Any mounting position not used can be securely blanked off until required.

Ideal for either top or bottom loading.

For More Information Contact Us

VOH800 Series

500mm (20") MANHOLE COVER

Plated steel construction. Features maximum three mounting positions for vapour recovery, overfill protection and dip and fill accessories.

Made to order with mounting positions as required.

For More Information Contact Us

Swing Hatch SH303

The SH303 swing hatch is a 441mm swing easy access style manhole cover.

It features an integral emergency vent and provision for a pressure vacuum vent.

It comes complete with weld in coaming available in Aluminium, Mild Steel or Stainless Steel.

Various seal materials available to suit a wide range of applications.

It fully passes the Australian Drop Test and additionally complies with UK and US regulations.

For More Information Contact Us

Swing Hatch SH302

The SH302 cleanskin hatch cover comes complete with weld in coaming in Mild Steel, Aluminium or Stainless Steel.

The SH302 has no provision for pressure or vacuum relief.

Various seal materials available to suit a wide range of applications.

Optional full stainless steel construction (no vents)

For More Information Contact Us

Emergency Hatch EH230 Series

This 225 mm (9") unit is available in aluminium only.

The weld-in 150mm coaming is available in Aluminium, Mild Steel or Stainless Steel.

For safety the hatch has a two stage opening and also acts as an emergency vent.

It also incorporates a standard Liquip pressure vacuum vent for thermal relief of the tanker (optional).

It is supplied as a complete unit ready for fitting to a tanker or storage tank.

OPTIONS

A wide variety of seals are available depending on the product being transported

For More Information Contact Us

Pressure Hatch PH18 (18") and PH20 (20") Series

Pressure vessel hatches in a range of sizes and specifications for use with road, rail or storage tanks.

Cover is manufactured from cast aluminum.

The standard range of hatches, the PH 18" (460mm) and PH 20" (510 mm) allow secure access to pressure vessels for filling, cleaning and inspection.

They are supplied as a complete unit with coaming in mild steel or aluminium ready for fitting to a tank.

They comply with Australian pressure vessel standards and AS 1210.

Cam handles are adjustable without opening the hatch or depressurisation of the vessel.

OPTIONS

Steel or Aluminium Weld rings

For More Information Contact Us

MANHOLE COVER ACCESSORIES

Accessories to compliment and enhance your manhole covers

UG101 Ullage Gauge, Accessory Blank Plates, Manhole Cover Sightglass, Weather Hatches...

CLICK HERE TO VIEW THE LIQUIP MANHOLE COVER ACCESSORIES

2008 C&N PETROLEUM EQUIPMENT

Design: DRAGAN GRAFIX